Do you have a question about the Contixo F21 and is the answer not in the manual?
Brand | Contixo |
---|---|
Model | F21 |
Category | Drones |
Age Recommendation | 14+ |
Flight Time | 15 minutes |
Control Range | 100 meters |
Charging Time | 90 minutes |
Keep safe distance from people, objects, and avoid controlled airspace.
Do not operate under the influence of drugs/alcohol or in a state of fatigue.
Users are responsible for preventing injury and property damage; maintain safe distance.
Product not for children under 14; small parts pose choking hazard.
Use manufacturer-provided cables, supervise charging, keep away from combustibles.
Do not short-circuit, squeeze, mix, or overcharge batteries to prevent damage or explosion.
Maintain safe distance from high-speed rotating rotors to avoid injury.
Fly in empty rooms or outdoors with no rain/snow, wind level 2, below 16 feet (5m).
Stay away from rotating propeller blades and motors.
Throttle stick for ascend/descend/turn; direction stick for forward/backward/left/right.
One-key takeoff/landing, emergency stop, 3D roll, and headless mode.
Gesture photo/video, take photo/video, gallery access, switch camera.
One key takeoff/landing, headless mode, calibrate gyroscope, switch speed.
Push joysticks or press button to calibrate; lights blink and change to steady.
Press and hold button or click app icon for emergency stop; use only when necessary.
Explains left joystick (throttle) and right joystick (direction) movements.
Activates avoidance on three sides; drone retreats from detected obstacles.
Enter/exit Headless mode; flight direction is not tied to drone orientation.
Recall drone by holding return button; cancel by moving joystick or holding button.
Model F21, Weight 151g, Lipo Battery 1300mAh, Flight Time 15 mins, Charge Time 90 mins.
Control Range 100M, Wi-Fi Camera Range 35M, Recommended Height 5M.
Lens FOV 60°, Angle -90° to 15°, Photo JPEG, Video MP4, 1080P @ 15fps.
Check remote sync and battery power; refer to flight pages for solutions.
Check battery, propeller installation, and blade orientation for solutions.