Why won't my Contixo Drone take off even though the blades are spinning?
There are several reasons why your Contixo drone might not take off even if the blades are spinning. It could be due to insufficient battery power, so try recharging it. Another possibility is that the blades are distorted, in which case you should replace them. Finally, ensure that Side A and Side B blades are not reversed.
What to do if Contixo Drone shakes heavily?
If your Contixo drone is shaking heavily, it's likely that the blades are distorted. You should replace the blades to resolve this issue.
What to do if Contixo Drone does not stabilize during flight with fine tuning?
If your Contixo drone doesn't stabilize during flight, even with fine tuning, or it cannot takeoff after an accident, consider these potential causes. The blades might be distorted, requiring replacement. Alternatively, the motor could be defective, which would also necessitate replacement.
Fly within legal limits, avoid controlled airspace, and adhere to FAA regulations.
Maintain distance from crowds, buildings, trees, and avoid adverse weather for safety.
Avoid moisture to prevent damage to precision electronic and mechanical parts.
Use only original Contixo parts for re-equipping and maintenance to ensure safety and warranty.
Operate the drone in accordance with state law, free from fatigue or impairment.
Users are responsible for ensuring the aircraft causes no injury or property damage.
Operate strictly as per manual during debugging/assembly and maintain distance during flight.
Product for ages 14+ under adult guidance; not for children under 14.
Keep small parts away from children to prevent choking hazards or accidental swallowing.
Adult supervision required during charging; keep battery away from combustible objects.
Do not short-circuit, decompose, or expose battery to fire/heat sources.
Maintain a safe distance from the rotating rotor to avoid injury from cuts or wounds.
Do not fly over groups of people, stadiums, or sports events.
Be aware of and comply with all relevant airspace restrictions and requirements before flying.
Remove the lithium battery from the drone's compartment.
Connect the USB cable to charge; light indicates charging status.
Use original cable, do not leave unattended, avoid overcharging, and fire.
Solutions for drone not responding, failing to take off, shaking, or losing balance.
To Next Page
General
