Need help?Do you have a question about the Contour PLUS ONE and is the answer not in the manual?
Enable Bluetooth on your mobile device via Settings to prepare for meter pairing.
Initiate meter pairing in the app after account setup; keep meter nearby.
Press and hold meter's center button until a flashing blue light appears.
Tap the meter's name and serial number matching your device in the app.
The CONTOUR DIABETES app will establish a connection with the paired meter.
Approve the 'Bluetooth Pairing Request' on your mobile device to finalize the connection.
Confirms meter and app are paired; proceed to set up the CONTOUR DIABETES app.
Enable Bluetooth on your mobile device via Settings to prepare for meter pairing.
Initiate meter pairing in the app after account setup; keep meter nearby.
Press and hold meter's center button until a flashing blue light appears.
Tap the meter's name and serial number matching your device in the app.
The CONTOUR DIABETES app will establish a connection with the paired meter.
Approve the 'Bluetooth Pairing Request' on your mobile device to finalize the connection.
Confirms meter and app are paired; proceed to set up the CONTOUR DIABETES app.
General| Measurement Range | 20-600 mg/dL |
|---|---|
| Sample Size | 0.6 µL |
| Test Time | 5 seconds |
| Connectivity | Bluetooth |
| Weight | 36 g |
| Memory Capacity | 800 test results |
To Next Page
