To Next PageTo Next Page
Need help?Do you have a question about the Contour Next Link 2.4 and is the answer not in the manual?
Covers serious illness, consulting healthcare professionals, and biohazard risks.
Instructions for charging the meter via wall outlet or computer.
Overview of the meter system and its compatibility with test strips.
Details on inserting the test strip correctly into the meter.
Identifies key components of the meter, including screen, buttons, and ports.
Explains how to navigate and make selections using the meter's buttons.
Steps to select the preferred language for the meter display.
Guides on connecting the meter to a MiniMed insulin pump via Auto Connect.
Sets preferences for automatic or manual sending of test results.
Guides on setting and adjusting high and low blood sugar alert thresholds.
Instructions on how to prepare the lancing device for use.
Instructions for applying more blood if the initial drop is insufficient.
Process of marking test results with meal context for better tracking.
Instructions for obtaining a blood sample from the palm for AST.
Using the meter's lighted test strip port in low-light conditions.
Explains when and how to perform quality control tests with control solution.
How to mark test results with meal context for better tracking.
Instructions on how test results are sent from the meter to the insulin pump.
Guidance on sending manual or preset boluses from the meter to the pump.
Steps for sending a pre-configured bolus amount from the meter to the pump.
How to set a reminder for the next blood glucose test.
Procedures for disabling test reminders through the Setup Menu.
Functionality for sending boluses to the insulin pump.
How to review stored blood glucose test results and notes.
How to view historical glucose data averages with or without AutoLog.
Settings related to connecting and managing the insulin pump.
Accessing device-specific settings for pump connection.
Guides for connecting the meter to the pump using manual serial number entry.
How to view the current pump connection status or disconnect it.
How to set up recurring test reminders through the Setup Menu.
How to set the date when the meter is not connected to a pump.
How to enable or disable audible alerts and sounds on the meter.
Steps to enable the AutoLog feature for marking test results.
Steps to disable the AutoLog feature for marking test results.
Guide on transferring glucose data to specific software for analysis.
Explains common error codes and how to resolve them.
How to interpret the battery level indicator on the meter.
Details on fast charging and the standard battery charging process.
Details on the accuracy of the meter's test results compared to standard methods.
A list of items to have ready when contacting customer service.
Instructions for cleaning the meter to remove visible dirt and debris.
Detailed steps for disinfecting the meter to reduce infection risk.
General| Brand | Contour |
|---|---|
| Model | Next Link 2.4 |
| Category | Blood Glucose Meter |
| Language | English |
