Contour Next Link 2.4 User Manual

23
TESTING
APPLY BLOOD
WARNING
• Do not calibrate your continuous glucose monitoring device from a control result
• Do not calculate a bolus based on a control result
WARNING
Shake the control solution well before testing.
Control Solution Testing
Control Solution* Testing
CAUTION: Check the expiry date on the test strip bottle and the expiry date and
discard date on the control solution bottle. DO NOT use expired materials.
Quality Control
Normal, Low and High control solutions are available separately if not included in the meter
kit. Always use CONTOUR NEXT control solutions. Other brands could present incorrect
results. If you need help locating CONTOUR NEXT control solutions, contact Customer
Service. Please see back cover for contact information.
1. Remove the test strip from the bottle and firmly snap the lid closed.
2. Hold the test strip with the grey square end facing up.
3. Insert the grey square end of the test strip into the test
strip port until the meter beeps.
4. You will see the Apply Blood screen. The meter is now
ready for you to test.
CAUTION: Use only CONTOUR
®
NEXT control solution (Normal, Low and High) with your
CONTOUR
®
NEXT LINK 2.4 blood glucose monitoring system. Using anything other than
C
ONTOUR NEXT control solution can cause inaccurate results.
* Control solution may not be included in all meter kits. Contact Customer Service for information on
obtaining control solution. See back cover for Customer Service contact information.
• Shake the control solution bottle well, about 15times before every use.
• Unmixed control solution may cause inaccurate results.
You should perform a control test when:
• using your meter for the first time
• you open a new bottle or package of test strips
• you think your meter may not be working correctly
• you have repeated, unexpected blood glucose results
81552940_CntrNextLINK2_4_UG_EN_FpBp_v5.indd 23 8/18/16 11:21 AM
TESTING
22
3.8
Low Blood Sugar
13.9
High Blood Sugar
• A screen with large orange numbers alerts you that
your blood sugar is high.
10:30 PM | 10/13
Bolus
Reminder
Notes
13.9
mmol
L
High Blood Sugar
Before Meal
After Meal
Time After Meal
Don’t Feel Right
Sick
Stress
Activity
Go Back
ADD NOTES
OK
®
High and Low Blood Sugar Alert Screens
High and Low Blood Sugar Alert Screens
Your meter has been preset with a low blood sugar (hypoglycaemia) value of 3.9 mmol/L
and a high blood sugar (hyperglycaemia) value of 13.9mmol/L. These are the preset values,
but can be customized by you and/or your health care professional. Youcan change the
High and Low Alert levels under Main Menu, Setup option (see page51).
If your blood sugar reading is under your low blood sugar alertlevel:
• A screen with large orange numbers alerts you that
your blood sugar is low.
If your blood sugar reading is over your high blood sugar alertlevel:
• If AutoLog is ON and you did not mark your result
before the high or low alert appeared, select Notes.
• Press the  or  button to scroll through the choices.
• Press
OK when your choice is highlighted.
Testing in the Dark
Your meter has a lighted test strip port to help you test in the dark.
• With the meter off, give the top Menu button two quick presses to turn on the test strip
port light.
• Insert a test strip and the display screen appears.
• Once blood is applied to the test strip, the light goes off.
• Continue with your test.
• Two quick presses of the top Menu button also turns off thelight.
81552940_CntrNextLINK2_4_UG_EN_FpBp_v5.indd 22 8/18/16 11:21 AM
23
TESTING
APPLY BLOOD
WARNING
• Do not calibrate your continuous glucose monitoring device from a control result
• Do not calculate a bolus based on a control result
WARNING
Shake the control solution well before testing.
Control Solution Testing
Control Solution* Testing
CAUTION: Check the expiry date on the test strip bottle and the expiry date and
discard date on the control solution bottle. DO NOT use expired materials.
Quality Control
Normal, Low and High control solutions are available separately if not included in the meter
kit. Always use CONTOUR NEXT control solutions. Other brands could present incorrect
results. If you need help locating CONTOUR NEXT control solutions, contact Customer
Service. Please see back cover for contact information.
1. Remove the test strip from the bottle and firmly snap the lid closed.
2. Hold the test strip with the grey square end facing up.
3. Insert the grey square end of the test strip into the test
strip port until the meter beeps.
4. You will see the Apply Blood screen. The meter is now
ready for you to test.
CAUTION: Use only CONTOUR
®
NEXT control solution (Normal, Low and High) with your
CONTOUR
®
NEXT LINK 2.4 blood glucose monitoring system. Using anything other than
C
ONTOUR NEXT control solution can cause inaccurate results.
* Control solution may not be included in all meter kits. Contact Customer Service for information on
obtaining control solution. See back cover for Customer Service contact information.
• Shake the control solution bottle well, about 15times before every use.
• Unmixed control solution may cause inaccurate results.
You should perform a control test when:
• using your meter for the first time
• you open a new bottle or package of test strips
• you think your meter may not be working correctly
• you have repeated, unexpected blood glucose results
81552940_CntrNextLINK2_4_UG_EN_FpBp_v5.indd 23 8/18/16 11:21 AM
TESTING
22
3.8
Low Blood Sugar
13.9
High Blood Sugar
• A screen with large orange numbers alerts you that
your blood sugar is high.
10:30 PM | 10/13
Bolus
Reminder
Notes
13.9
mmol
L
High Blood Sugar
Before Meal
After Meal
Time After Meal
Don’t Feel Right
Sick
Stress
Activity
Go Back
ADD NOTES
OK
®
High and Low Blood Sugar Alert Screens
High and Low Blood Sugar Alert Screens
Your meter has been preset with a low blood sugar (hypoglycaemia) value of 3.9 mmol/L
and a high blood sugar (hyperglycaemia) value of 13.9mmol/L. These are the preset values,
but can be customized by you and/or your health care professional. Youcan change the
High and Low Alert levels under Main Menu, Setup option (see page51).
If your blood sugar reading is under your low blood sugar alertlevel:
• A screen with large orange numbers alerts you that
your blood sugar is low.
If your blood sugar reading is over your high blood sugar alertlevel:
• If AutoLog is ON and you did not mark your result
before the high or low alert appeared, select Notes.
• Press the  or  button to scroll through the choices.
• Press
OK when your choice is highlighted.
Testing in the Dark
Your meter has a lighted test strip port to help you test in the dark.
• With the meter off, give the top Menu button two quick presses to turn on the test strip
port light.
• Insert a test strip and the display screen appears.
• Once blood is applied to the test strip, the light goes off.
• Continue with your test.
• Two quick presses of the top Menu button also turns off thelight.
81552940_CntrNextLINK2_4_UG_EN_FpBp_v5.indd 22 8/18/16 11:21 AM
81552940_CntrNextLINK2_4_UG_EN_FpBp_v6_placed.pdf:26

Contour Next Link 2.4 Specifications

General

Brand	Contour
Model	Next Link 2.4
Category	Blood Glucose Meter
Language	English