Contour Next Link 2.4 User Manual

27
FEATURES
Bolus
Total
Stop Bolus
Basal
10:00
PM
mmol/L
9.3
0.250 U
Manual Bolus was sent.
OK
7. A confirmation screen appears on both your meter and
yourpump.
Bolus
Total
Stop Bolus
Basal
10:00
PM
mmol/L
9.3
NOTE: Verify that the bolus amount shown on
your meter matches the total amount shown on
yourpump.
Preset Bolus
First, follow Steps 1, 2 and 3 on page 26.
4. Next, choose the Preset Bolus you wish to send to yourpump.
NOTE: Preset bolus is set on your pump.
6. Press Yes to send the bolus to your pump.
PRESET BOLUS
OK
Breakfast
Dinner: N 0.750 U
Snack
Deliver Dinner Bolus?
PRESET BOLUS
Yes
No
N 0.750 U
N 0.750 U
Dinner Bolus was sent.
OK
5. Press the  or  button until your preset bolus choice
is highlighted. Then pressOK.
U
U
BG
U
U
BG
Preset Bolus
7. A confirmation screen appears on both your meter and
yourpump.
81552940_CntrNextLINK2_4_UG_EN_FpBp_v5.indd 27 8/18/16 11:21 AM
FEATURES
26
4. Next, choose the bolus amount.
MANUAL BOLUS
SET BOLUS AMOUNT
0.000 U
OK
MANUAL BOLUS
SET BOLUS AMOUNT
0.250 U
OK
Deliver Bolus?
MANUAL BOLUS
Yes
No
0.250 U
Manual Bolus
BOLUS
Manual Bolus
Preset Bolus
2. On the next screen, pressManual Bolus or Preset Bolus .
3. The Connecting to Pump screen appears.
MENU
Bolus
Logbook
Trends
OK
To send a Manual Bolus, continue with step 4, below.
To send a Preset Bolus, continue with step 4, page 27.
10:30 PM | 10/13
Bolus
Reminder
Notes
9.3
mmol
L
Sent, Before...
®
Manual Bolus
NOTE: Bolus increment setting on your meter is determined by the setting on
your MiniMed insulin pump. Youcan set your increment to 0.1, 0.05, or 0.025 units
onyourpump.
5. Press the  or  button to set the desired bolus
amount. Then press OK.
NOTE: Press and hold the  or  button to scroll through the list faster.
6. Press Yes to send the bolus to your pump.
OR, from the Main Menu, press Bolus.
1. While the test result is still displayed on the meter,
press
Bolus.
If Block Mode is ON at the pump, you are asked if you want to proceed with the bolus.
Block Mode is a MiniMed pump setting that restricts access to critical pump settings.
Pleasesee your MiniMed insulin pump user guide for more detailed instructions.
81552940_CntrNextLINK2_4_UG_EN_FpBp_v5.indd 26 8/18/16 11:21 AM
27
FEATURES
Bolus
Total
Stop Bolus
Basal
10:00
PM
mmol/L
9.3
0.250 U
Manual Bolus was sent.
OK
7. A confirmation screen appears on both your meter and
yourpump.
Bolus
Total
Stop Bolus
Basal
10:00
PM
mmol/L
9.3
NOTE: Verify that the bolus amount shown on
your meter matches the total amount shown on
yourpump.
Preset Bolus
First, follow Steps 1, 2 and 3 on page 26.
4. Next, choose the Preset Bolus you wish to send to yourpump.
NOTE: Preset bolus is set on your pump.
6. Press Yes to send the bolus to your pump.
PRESET BOLUS
OK
Breakfast
Dinner: N 0.750 U
Snack
Deliver Dinner Bolus?
PRESET BOLUS
Yes
No
N 0.750 U
N 0.750 U
Dinner Bolus was sent.
OK
5. Press the  or  button until your preset bolus choice
is highlighted. Then pressOK.
U
U
BG
U
U
BG
Preset Bolus
7. A confirmation screen appears on both your meter and
yourpump.
81552940_CntrNextLINK2_4_UG_EN_FpBp_v5.indd 27 8/18/16 11:21 AM
FEATURES
26
4. Next, choose the bolus amount.
MANUAL BOLUS
SET BOLUS AMOUNT
0.000 U
OK
MANUAL BOLUS
SET BOLUS AMOUNT
0.250 U
OK
Deliver Bolus?
MANUAL BOLUS
Yes
No
0.250 U
Manual Bolus
BOLUS
Manual Bolus
Preset Bolus
2. On the next screen, pressManual Bolus or Preset Bolus .
3. The Connecting to Pump screen appears.
MENU
Bolus
Logbook
Trends
OK
To send a Manual Bolus, continue with step 4, below.
To send a Preset Bolus, continue with step 4, page 27.
10:30 PM | 10/13
Bolus
Reminder
Notes
9.3
mmol
L
Sent, Before...
®
Manual Bolus
NOTE: Bolus increment setting on your meter is determined by the setting on
your MiniMed insulin pump. Youcan set your increment to 0.1, 0.05, or 0.025 units
onyourpump.
5. Press the  or  button to set the desired bolus
amount. Then press OK.
NOTE: Press and hold the  or  button to scroll through the list faster.
6. Press Yes to send the bolus to your pump.
OR, from the Main Menu, press Bolus.
1. While the test result is still displayed on the meter,
press
Bolus.
If Block Mode is ON at the pump, you are asked if you want to proceed with the bolus.
Block Mode is a MiniMed pump setting that restricts access to critical pump settings.
Pleasesee your MiniMed insulin pump user guide for more detailed instructions.
81552940_CntrNextLINK2_4_UG_EN_FpBp_v5.indd 26 8/18/16 11:21 AM
81552940_CntrNextLINK2_4_UG_EN_FpBp_v6_placed.pdf:30

Contour Next Link 2.4 Specifications

General

Brand	Contour
Model	Next Link 2.4
Category	Blood Glucose Meter
Language	English