Control 4 Onyx - COMFORT AND CLIMATE CONTROL; Thermostat Adjustment and Viewing; Thermostat Hold Options

Comfort
To v ie w, a dj u st or prog r am th e rm o st a ts :
1. From the Control4 Home screen, select Comfort.
2. Displayed are all of the available thermostats to view, adjust or program.
3. From here, the current temperature reading and settings are displayed. Thermostat settings can be adjusted
by increasing or decreasing the heat and cool points AND selecting one of the hold options located directly
under the thermostat reading.
!
•
The heat temperature specifies the coolest temperature you want your house.
•
The cool temperature specifies the warmest temperature you want your house.
Hold options include:
•
Hold Until Next Event: This selection will hold the temperature until the next scheduled programmed event
(See Thermostat Programming Below).
•
Hold Permanent: This selection will hold the temperature and override any scheduled programmed event (See
Thermostat Programming Below).
•
Hold 2 Hours: This selection will hold the current temperature for 2 hours only. After 2 hours, the thermostat
will revert back to the original setting or scheduled programmed event (See Thermostat Programming Below).
!