Control 4 Wireless thermostat - Programming, Maintenance, and Compliance; Program Scheduling Options

19
Options for Program Scheduling
The Wireless Thermostat comes with a pre-programmed
schedule.
Using any of the navigation programming options, you can
modify this pre-programmed schedule to meet individual needs.
Navigation programming options include: Wireless Touch
Screen, the Mini Touch Screen, and the System Remote
Control (On-Screen display).
There are six Program Events per day for each day of the
week. For each Program Event, you can enable, set a time, and
set unique set points for heat and cool.
The default pre-programmed schedule applies to every day of
the week as follows:
NOTE: You cannot program the schedule on the LCD Keypad or with the System Remote Control LCD
Screen.
MTuWThFSaSu Wake: Enabled 6:00 AM Heat Point: 70 Cool Point: 78
MTuWThFSaSu Away: Enabled 8:00 AM Heat Point: 62 Cool Point: 85
MTuWThFSaSu Return: Enabled 6:00 PM Heat Point: 70 Cool Point: 78
MTuWThFSaSu Sleep: Enabled 10:00 PM Heat Point: 62 Cool Point: 82
MTuWThFSaSu Custom 1: Disabled 11:00 PM Heat Point: 62 Cool Point: 85
MTuWThFSaSu Custom 2: Disabled 11:00 PM Heat Point: 62 Cool Point: 85
Navigation Device or Display