Control 4 ZCA-WMS10-2-ZP

To Next Page

Package contents

• ZCA-WMS10-2-ZP Wireless Motion Sensor

ZCA-WMS10-2EXT-ZP Wireless Motion Sensor (External

Antenna)

ZCA-WMS10-2L-ZP Wireless Motion Sensor-Line Powered

ZCA-WMS10-C-ZP Wireless Motion Sensor (Ceiling Mount)

ZCA-WMS10-CL-ZP Wireless Motion Sensor (Ceiling Mount,

Line Powered)

• Wall mount swivel bracket (1)

• Wall mounting screws (2)

• Plastic drywall anchors (2)

• 9V alkaline battery (ZCA-WMS10-2-ZP and ZCA-WMS10-

2EXT-ZP only) (1)

Features

The Wireless Motion Sensor works with your Control4® system

and combines the features of a passive infrared (PIR) motion

sensor with ambient light sensing detection into a single device.

A feature-rich Composer Properties page enables high levels of

control without programming scripts.

The Wireless Motion Sensor adds even more intelligent home

automation to trigger and control events throughout the

Control4 system based on object motion, occupancy, and room

ambient lighting levels. Automatically control room lighting,

pathway lighting, exterior lighting, HVAC, and audio/video

applications either inside or outside the home.

The Wireless Motion Sensor also “greens” up the Control4-

automated home by enabling occupancy-based automation

controls. Used in concert with additional Control4 certiﬁed

products such as wireless sensors, relays, dimmers, and

motorized window coverings, the motion sensor can control

heating, cooling, and lighting systems to help comply with

environmental policies—California Title 24, and Canada’s NBC

2005, for example—while conserving resources and saving

money on utilities.

• Automated control of lights based on room occupancy

• Alerts when someone enters front walkway

• Detection of outdoor light levels for dawn/dusk events

• Automated pathway lighting

• Any other control application you can devise and safely

integrate!.

Requirements

• Control4 controller

• Composer Pro 1.8.0 or higher

Important safety instructions

Important: Using this product in any manner other than

outlined in this document voids your warranty. Also,

Control4 is NOT responsible or otherwise liable in any

way for any damage resulting from the misuse of this

product. See

ctrl4.co/warranty

for details.

Speciﬁcations

Model numbers ZCA-WMS10-2-ZP, ZCA-WMS10-2EXT-ZP,

ZCA-WMS10-2L-ZP, ZCA-WMS10-C-ZP,

ZCA-WMS10-CL-ZP

Motion detection

method

Passive infrared (PIR)

Coverage 110°-160° wide angle lens 10-50 ft (3 m-15 m) depending on

sensitivity setting, mounting angle (for wall-mount), and

temperature. Motion sensors may be cascaded together to

improve coverage.

Recommended

mounting height

Wall mount: 7 ft nominal (2.1 m). Variable, dependent upon

desired application.

Internal light sensor

measurement range

~0.1 lux to 10,000 lux

LED indicator Red LED to indicate motion upon initial power up or after a

programming change is sent from Composer.

Unit dimensions Wall mount: 1.8 × 2.5 × 3.4 in (47.6 × 63.5 × 85.7 mm)

without antenna

Power source 9V alkaline (included with WMS10-2-ZP and ZCA-WMS10-

2L-ZP) or lithium battery. 9-24V AC/DC power adapter

(model no. MPS10A) also available for wall mounts only.

Power usage ~17mA fully active

Estimated battery life One to two years, depending on usage (standard 9V

alkaline battery), lithium battery will provide longer use.

Environmental Water resistant. IP44 (Splash Proof) rated. The Wireless

Motion Sensor is not waterproof and must be kept out

of direct contact with water. The product must not be

immersed.

Operational

temperature

-20°F to 158°F (-28°C to 70°C)

Humidity 5% to 95% non-condensing

Control4 support WMS10-2: Control4 OS 1.7.2 or greater

WMS10-2-ZP: Control4 OS 1.8.0 or greater

Wireless

speciﬁcations

IEEE 802.15.4 ZigBee® mesh networking

Wireless Motion Sensor

Installation Guide

Need help?

Do you have a question about the Control 4 ZCA-WMS10-2-ZP and is the answer not in the manual?

The Control4 Wireless Motion Sensor is a versatile device that integrates passive infrared (PIR) motion sensing with ambient light detection into a single unit, designed to enhance home automation within a Control4 system. It offers a wide range of control possibilities, allowing for intelligent automation based on object motion, occupancy, and ambient light levels.

Function Description

The Wireless Motion Sensor acts as a trigger for various events within a Control4 system. When motion is detected in its monitored area, it sends a "Motion detected" event to the Control4 controller. Conversely, if no motion is detected for a user-defined "Occupancy Hold Time," a "No motion" event is sent. This functionality enables automated control of lighting, pathway lighting, exterior lighting, HVAC, and audio/video applications, both indoors and outdoors.

Beyond motion detection, the sensor incorporates an ambient light sensor, allowing it to detect outdoor light levels for dawn/dusk events. This feature can be used to automate actions based on natural light conditions.

The device supports "occupancy-based automation controls," which means it can help conserve resources and save money on utilities by controlling systems like heating, cooling, and lighting based on whether a room is occupied. This aligns with environmental policies such as California Title 24 and Canada's NBC 2005.

Multiple motion sensors can be cascaded or linked together to improve detection coverage in larger areas. In such a setup, a "Motion detected" event occurs if any linked sensor detects motion, and a "No motion detected" event is sent only when all linked sensors' Occupancy Hold Times have expired. This cascading is configured within Composer Pro's Connections tab.

Important Technical Specifications

Model Numbers: ZCA-WMS10-2-ZP, ZCA-WMS10-2EXT-ZP, ZCA-WMS10-2L-ZP, ZCA-WMS10-C-ZP, ZCA-WMS10-CL-ZP.
Motion Detection Method: Passive Infrared (PIR).
Coverage: 110°-160° wide angle lens, 10-50 ft (3 m-15 m) depending on sensitivity setting, mounting angle (for wall-mount), and temperature.
Recommended Mounting Height: Wall mount: 7 ft nominal (2.1 m). Variable, depending on desired application.
Internal Light Sensor Measurement Range: -0.1 lux to 10,000 lux.
LED Indicator: Red LED to indicate motion upon initial power up or after a programming change is sent from Composer.
Unit Dimensions (Wall mount): 1.8 x 2.5 x 3.4 in (47.6 x 63.5 x 85.7 mm) without antenna.
Power Source: 9V alkaline battery (included with WMS10-2-ZP and ZCA-WMS10-2L-ZP) or lithium battery. A 9-24V AC/DC power adapter (model no. MPS10A) is also available for wall mounts only.
Power Usage: ~17mA fully active.
Estimated Battery Life: One to two years with a standard 9V alkaline battery; lithium batteries provide longer use.
Environmental: Water resistant (IP44 Splash Proof rated). Not waterproof and must be kept out of direct contact with water; not to be immersed.
Operational Temperature: -20°F to 158°F (-28°C to 70°C).
Humidity: 5% to 95% non-condensing.
Control4 Support: WMS10-2: Control4 OS 1.7.2 or greater; WMS10-2-ZP: Control4 OS 1.8.0 or greater.
Wireless Specifications: IEEE 802.15.4 ZigBee® mesh networking.

Usage Features

Composer Properties Page: A feature-rich Composer Properties page allows for high levels of control without requiring programming scripts. This includes adjusting motion sensor sensitivity, configuring occupancy hold time, and setting light sensor parameters.
Motion Sensor Sensitivity Adjustment: The sensitivity can be adjusted via a slider in Composer Pro. Lower sensitivity requires more movement to trigger the sensor. A "walk test" is recommended after adjustment to ensure satisfactory performance.
Occupancy Hold Time: This setting determines how long the "Motion detected" event remains active after motion ceases. It can be adjusted from five seconds to 60 minutes. A longer hold time can impact battery life.
Light Sensor Setup: Allows configuration of "Night mode" and "Day mode" based on light levels. Users can set thresholds for entering and exiting Night mode, along with the required duration for these light conditions.
Light Level Monitor: Instructs the sensor to send an updated light level to the ZigBee network when the light level changes by a specified percentage. Lower percentages can compromise battery life.
Disable Motion Sensor: The motion sensor function can be disabled when in Day or Night mode, which helps conserve battery life.
Check-In Interval: The Wireless Motion Sensor can be instructed to send periodic updates of its motion status and light level. Adjusting this interval can affect battery life.
Mounting Considerations: For wall-mount sensors, the recommended mounting height is six to eight feet. The sensor should be placed to avoid direct sunlight, heat sources, and areas with strong electromagnetic interference (e.g., Wi-Fi, cordless phones) to ensure reliable operation. Ceiling-mount sensors cannot be adjusted.
Cascading Multiple Sensors: Multiple sensors can be linked to improve coverage in large areas, with events triggered by any sensor and "no motion" events sent only when all linked sensors are clear.

Maintenance Features

Battery Replacement: For battery-powered models, the device uses a 9V alkaline or lithium battery. The battery level is indicated in the Advanced Properties page in Composer Pro.
Troubleshooting:
- Removing from Network/Restoring Factory Settings: To remove the sensor from the network and restore factory settings, remove power, then press and hold the ID button while returning power. Continue holding until the LED turns solid orange, then release.
- Restarting the Sensor: If the sensor is not working properly, remove the batteries or power supply for at least 10 seconds, then return power to ensure a proper reboot.
Firmware Updates: The device requires specific Control4 OS versions (1.7.2 or greater for WMS10-2, 1.8.0 or greater for WMS10-2-ZP) for full functionality, implying that software updates may be necessary for optimal performance.