To Next PageTo Next Page
Need help?Do you have a question about the Control Techniques UNI 2401 and is the answer not in the manual?
General| Brand | Control Techniques |
|---|---|
| Model | UNI 2401 |
| Category | DC Drives |
| Language | English |
Overview of the Unidrive Servo and Unimotor product line.
Configuration for simplified drive operation with essential parameters.
Configures drive for motor control based on PID control signal.
Enables limit switch lockout for axis position control systems.
Details AC supply needs, temperature, humidity, altitude, and vibration limits.
Guidelines for connecting and selecting dynamic braking resistors.
Lists various protection mechanisms and trip conditions for the drive.
Formulas for average power dissipation and peak power rating of resistors.
Detailed terminal functions, types, and ratings for control signals.
Diagram illustrating standard connections for speed control in terminal mode.
Instructions for panel wiring to ensure EMC compliance and precautions.
Guidance on selecting motor cables and fuses based on capacitance and frequency.
Procedures for calculating enclosure size based on heat dissipation needs.
Summary of drive's EMC performance and compliance with immunity standards.
Specifications for RFI filter types, including ratings, dimensions, and weights.
Physical, environmental, and mounting specifications for Unimotors.
Detailed technical data for Unimotor frame sizes 75 and 95.
Detailed technical data for Unimotor frame sizes 115, 142, and 190.
Data tables for Unimotor/Unidrive combinations at 12kHz switching frequency.
Data tables for motor-drive combinations at 12kHz and 9kHz switching frequencies.
Introduction to the CTSS software for sizing servo applications.
Detailed features, tasks, communication ports, and technical specifications of the UD70 module.
