888-Convaid (266-8243)
107
Cruiser 12
INSTRUCTIONS
Anti-Tip Tube - Pair
1. To install the Anti-Tip Tubes, align the tube with the end of the round frame tubing
located next to the rear wheel.
2. Push the detent pin while positioning the Anti-Tip Tube onto the round frame
tubing and push until the “release button” pops through the hole located on the
Anti-Tip Tube.
3. Repeat steps 1 & 2 for opposite side.
4. To remove the Anti-Tip Tubes, perform above steps in reverse order.
To Next Page
Loading...
