Convaid Cruiser 12 - Page 73

888-Convaid (266-8243)
69
Cruiser 12
INSTRUCTIONS
1. Remove upholstery and seat tube extensions from frame.
2. Partially fold the frame.
3. Using a 7/16” wrench and a 5/32” allen wrench, remove the bolt connecting the seat
tube to the black slide housing from the left side of the frame.
4. Slide existing seat support off.
5. Slide new seat support onto the seat tube. Make sure the cutout of the seat support
goes around the front leg.
6. Reattach the bolt connecting the seat tube to the black slide housing.
7. Use a 7/16” wrench and a 5/32” allen wrench to tight the nut and bolt.
8. Repeat steps 3 to 7 for the right side.
9. Reinstall the seat tube extension and the upholstery.
Heavy Duty Textilene Upholstery with +3" Seat
Depth Extension