Convaid Cruiser 12 - Page 91

888-Convaid (266-8243)
87
Cruiser 12
INSTRUCTIONS
1. Use a 5/32" allen wrench to remove the hardware attached on the existing cushion.
2. Reattach hardware to the new cushion. Be sure to follow the schematic to place the
washers in the proper order.
Align Seat Cushion Assy
995919
QTYDESCRIPTION
PART NUMBERITEM
1CX-10 Sensiform Support Cushion & Cover5089781
Cruiser 10 Support Seat Cushion & Cover
Assembled
Exploded
1
Small Metal
Washer
Nylon Washer
Metal Washer
1" OD Metal Washer
Cushion Attachment
Cushion
Attachment
Bar
Screw