2.
Planning the installation
2
Dear owner,
- Congratulations on the purchase of this new premium electric heater from
CONVECTAIR, manufacturer of the highest quality heating product in the
electrical industry.
- To obtain the best results and the ultimate in performance and comfort please
carefully read the installation and maintenance instructions shown in this
manual.
Introduction
1
Choose the location where the
CONVECTAIR will be installed.
Check that nothing such as
drapes or furniture interferes
with the airflow to and from the
CONVECTAIR ; see required
clearances (Figure 1).
Make a note of the minimum
required clearances for this
heater and ensure that there are
no restrictions before choosing
the location.(see Figure 1).
6
"
150 mm
4
"
-
100 mm
20
"
520 mm
4
"
-
100 mm min.
MINIMUM
CLEARANCE
Figure 1
Do not cover or obstruct the air intake or outlet on the unit as this could
cause overheating and damage the heater.
IMPORTANT :
DO NOT COVER THE HEATER
The above logo warns of a risk : do
not cover.
Figure 2
1-
2-
3-
To Next Page
Loading...
