convenience concepts 413372 - Step 1: Prepare and Attach Legs; Remove Drawers from Top Panel; Attach Legs to Top Panel; Step 2: Install Drawer Knobs

2. Connect legs to top panel as shown
using bolts (A) , washers (E) and allen wrench (B) .
Page 3 of 4
Step 1
Step 2
X 8
X 1
X 8
1
1
1
2
2
2
A
B
E
A
B
E
*Assemble face down on carpet or so surface.*
1. Remove knob (I) from inside of drawer to outside of drawer using a hand held screwdriver.
Screw (H) goes on inside of drawer .
I
H
1.Remove drawers from top panel .