6 Moving and setting up the appliance
ConvoVent 4 / ConvoVent 4+ 43
Item Name Quantity
1
Steam separator 1
2
ConvoVent 4 case 1
3
Mist collector 2
4
Baffle filter 3
5
Ventilation port on 10.10/10.20/20.10/20.20 1
6
Ventilation port on 6.10 or 12.20 1
7
Fixing bracket with two screws M5x12 DIN 7985 1
8
Right-angled pipe, ConvoVent 4/4+ for STK 1 (STK 6.10/10.10)
2 (STK 6.20/10.20)
9
Mains supply cable, 3-core, with cable gland 1 (6.10/10.10/20.10)
2 (6.20/10.20/12.20/20.20)
10
Control cable fitted with X38 connector 1 (6.10/6.20/10.10/10.20/12.20/20.10/20.20)
2 (STK 6.10/10.10 / STK 6.20/10.20)
11
Self-adhesive tie-wrap anchor with tie-wrap 1
Contents of the installation kit, ConvoVent 4+
The figure below shows a size 6.10 hood as an example for all appliance sizes:
To Next Page
Loading...