56
What if ...
In the following table, other irregularities during operation are described which are not signalled with an
error message.
If the fault cannot be remedied using the tips in the list, please call your local Service.
Fault Possible cause Remedy
Uneven browning
Water jet from the exhaust air
opening when door is closed
During operation, water sprays
from the steam generator into the
cooking chamber
Pools of water in the cooking
chamber
Air intake plate not correctly closed
Cooking chamber temperature set
too high
Not preheated
Set temperature lower and extend
cooking time
Preheat, see instructions ‘Preheating’
Mains lead not connected, external
fuse has blown
The display is dark and does not
react to switching on
Cooking chamber light defective
Call Service
No cooking chamber light
Clean steam measuring cable: see
chapter "Cleaning and servicing"
Steamer drain clogged Clean drain
Steam generator has not been flushed
for too long (OSC)
Flush steam generator thoroughly, see
chapter "Cleaning and servicing"
Automatic steam generator flushing not
performed for too long (OSP)
Clouds of steam from the exhaust air
opening on the top of the steamer
Call Service
Steam measuring cable soiled
Drain is clogged
Flush condenser and steamer drain,
inspect and clean drain system on site
Demoisturising valve in drain of
cooking chamber jammed (OSP)
Clean and flush (move back and forth)
Trigger automatic flushing or flush steam
generator thoroughly
Close air intake plate correctly
To Next Page
Loading...
Need help?
General
