Cook's essentials 820906 - Detailed Operation Instructions; Standby Mode; Operation Mode; Preheat Function

12
Detailed Operation Instructions
1. Standby Mode
Insert your Cooking Tray into the Tray Opening (9) and push fully home into the Air
Fryer. Firstly, to confirm that the Cooking Tray is correctly installed into the appliance,
insert the Mains Plug (14) into the wall socket and switch the socket on. The appliance
will be powered on and beep once. Concurrently, all the lights are lit for one second and
then extinguished, the Power Key will remain illuminated, and the Air Fryer enters
Standby mode.
2. Operation Mode
2.1 Preheat Function: If you wish to use the Preheat Function then follow these
instructions, if not then remember you may need to add 3 minutes to your overall cooking time.
(i) Insert the Cooking Tray and connect Power.
(ii) Use the (2CP) Preset Key to select the Preheat function (12CP). Once selected,
the Power (1CP) Key needs to be pressed again, the Preheat process will then start.
2.2 Remove the Cooking Tray and add your food,
WARNING: Do not overll the Cooking Tray.
2.3 From Standby Mode, touch the (1CP) Power Key Icon once, the Air Fryer switches to
the Chips mode 180C / 20min. which are the default settings for temperature and cooking
time. These settings will be displayed in the (9CP) and (10CP) Displays respectively and
the Chips Icon ashes.
NOTE: If you are cooking Chips then you will need to press the (1CP) Power Key
a second time to start the cooking process. All other programme selections also
require a second press of the (1CP) to start.
2.4 From this point all adjustments are available to you. The following instructions
assume you have either preheated the Cooking Tray or will be adding 3 minutes to your
cooking time. So, you can;
(i) Press the 2CP Preset Key to select a Preset programme. Press sequentially to step
through your options. The associated indicator lights as you make the selection.
(ii) From the default mode adjust the Temperature using 3CP and 4CP and or the
Time using 5CP and 6 CP keys.
NOTE: Don’t forget to add the 3 minutes to your cooking time if required.
(iii) When you have chosen or adjusted your Programme you will need to press the
(1CP) Power Key once more to start the cooking process.
NOTE: If your food requires shaking a “Beep” will sound 3 times.