Auto: Automatic programme
• Light on: Programmer in automatic position and programmed.
• No symbol lit, except the clock numbers means that a waiting time is programmed.
Programmer functions
• 24 hour display clock.
• Alarm (Maximum 23:59)
• Automatic programming (start and end of cooking).
• Semi-automatic cooking (only start or only end of cooking).
• The timer only works when the appliance is connected to the electricity supply.
Electronic clock
• To enter the correct time press
symbol and at the same time of of the buttons or until the correct
time is shown. There is a 5 second acceptance delay during which no button should be touched.
• The speed that the marker changes will noticeably increase some seconds after beginning to press the buttons
and .
Manual cooking (without using the programmer)
• To use the oven with the help of the programme, the flashing “Auto” indication must be cancelled by pressing the
button
.
• If the “Auto” indicator is not flashing (which means that the oven is programmed) the programming must be
cancelled first by pressing
and setting the marker to 0.