How to fix a Cooke & Lewis CLIND60E Hob that won't turn on?
If your Cooke & Lewis hob won't turn on, first ensure it's properly connected to the power supply and switched on. Check the household fuse and test other electrical appliances to see if there's a power cut.
What to do if my Cooke & Lewis hob pan does not heat up?
If your pan isn't heating up and doesn't show on the display of your Cooke & Lewis hob, it might not be suitable for induction cooking or it may be too small or not centered correctly. Try using cookware designed for induction hobs and ensure the pan's base matches the cooking zone size and is properly centered.
Why are the touch controls on my Cooke & Lewis CLIND60E Hob unresponsive?
If the touch controls on your Cooke & Lewis hob aren't responding, the controls may be locked. Try unlocking the controls, as the safety mode (child lock) might be activated.
Why is my Cooke & Lewis induction hob making fan noise?
The fan noise from your Cooke & Lewis induction hob is normal. A cooling fan is built-in to prevent the electronics from overheating and may continue running even after you turn off the hob. Do not switch off the power at the wall while the fan is running.
Why does my Cooke & Lewis induction hob hum on high heat?
The low humming noise from your Cooke & Lewis induction hob when used on a high heat setting is a normal result of the induction cooking technology. The noise should decrease or disappear when you lower the heat setting.
Why are the touch controls on my Cooke & Lewis CLIND60E difficult to operate?
If you're finding the touch controls on your Cooke & Lewis hob difficult to use, ensure the control area is dry and use the ball of your finger when touching the controls. A slight film of water or using the tip of your finger can cause issues.
Why do my pans make crackling noises on my Cooke & Lewis CLIND60E?
The crackling or clicking noises coming from some pans on your Cooke & Lewis hob are usually due to the cookware's construction. Different metal layers in the cookware vibrate differently and this is normal and doesn't indicate a fault.
What does E2E mean on my Cooke & Lewis CLIND60E?
If your Cooke & Lewis hob displays the error code E2E, it means the temperature sensor of the IGBT is high. Please restart the hob after it cools down.
What does error ER03 mean on a Cooke & Lewis hob?
If your Cooke & Lewis hob displays the error code ER03, it indicates water or a pot is on the glass over the control. Clean the user interface.
General| Brand | Cooke & Lewis |
|---|---|
| Model | CLIND60E |
| Category | Hob |
| Language | English |
To Next Page
