Why do cooking smells linger even when my Cooke & Lewis Ventilation Hood is on?
If your Cooke & Lewis Ventilation Hood works normally but cooking smells linger, it's possible that the carbon filter is either not fitted in recirculation mode or is full of grease. Try fitting a carbon filter or replacing the carbon filter.
Why is the suction performance reduced on my Cooke & Lewis CLVHB60a Ventilation Hood?
If you notice reduced suction performance in your Cooke & Lewis Ventilation Hood, several factors could be responsible. Try selecting a higher speed setting. Also, the aluminum filters may be dirty and require cleaning. Check for any obstructions in the top vent. If you're using an optional vent kit, ensure it's correctly installed according to the manufacturer's instructions. Finally, the installation may not comply with the manufacturer's instructions, so make sure the vent hose has the correct diameter throughout without any reductions or restrictions.
What to do if my Cooke & Lewis CLVHB60a is vibrating too much?
If your Cooke & Lewis Ventilation Hood is vibrating excessively, it could be due to several reasons. First, the appliance might not be installed properly on the brackets; in this case, take down the appliance and check it is properly fixed. Second, the fan blade may be damaged, requiring repair by qualified service personnel after you switch off the appliance. Finally, the fan motor might not be fixed tightly.
General| Brand | Cooke & Lewis |
|---|---|
| Model | CLVHB60a |
| Category | Ventilation Hood |
| Language | English |
Details the requirement for connecting the appliance directly to the mains via an omnipolar circuit breaker.
Provides official EU information and energy consumption data for the cooker hood models.
Offers tips to minimize the cooker hood's environmental impact during cooking.
To Next Page