Need help?Do you have a question about the Cooke & Lewis CL60CGRF and is the answer not in the manual?
General| Brand | Cooke & Lewis |
|---|---|
| Model | CL60CGRF |
| Category | Ventilation Hood |
| Language | English |
Essential safety guidelines for installation, covering electrical hazards and glass handling.
Verify all listed parts are present before proceeding with the installation.
Select an appropriate location, ensuring adequate ventilation and space.
Mark hole positions and drill carefully, checking for hidden utilities like pipes and cables.
Use recommended fixings and screws; avoid overtightening to prevent glass damage.
Connect directly to mains using a circuit breaker; ensure proper earthing.
Follow wiring diagrams, check cable condition, and ensure correct earthing.
Read instructions and switch on at the fused connection unit before use.
Overview of the four-button control panel and its functions.
Configure installation settings for ducted or recirculation modes.
Operate lights, fan speed, boost function, and timer settings.
Control the light independently or in conjunction with the fan.
Turn fan on/off, adjust speed, and use boost for maximum extraction.
Set and manage timer cycles for fan operation, including speed reduction.
Pair the hood and hob via radio frequency for remote operation.
Control hood extraction via hob power output and settings.
Replace carbon filters every three months; reset alert after replacement.
Clean grease filters monthly by soaking in hot water and detergent.
LED lamps are not user-replaceable; contact customer helpline for service.
Contact details for customer support and engineer visits.
To Next Page