Cooke & Lewis CLTHW60 User Manual (English)

Questions and Answers:

J
Justin MurphyAug 4, 2025
Why is the suction performance reduced on my Cooke & Lewis Ventilation Hood?
- M
  millermarthaAug 4, 2025
  Reduced suction performance in your Cooke & Lewis Ventilation Hood can occur for several reasons: the selected speed may be too low, so try selecting a higher speed; the aluminum filters may be dirty and need cleaning; the top vent might be obstructed, so clear any obstructions; the optional vent kit might be twisted and needs adjustment according to the manufacturer’s instructions; or the installation may not comply with the manufacturer's instructions, meaning the vent hose should be the correct diameter throughout with no reductions or restrictions.
D
Daniel AlexanderAug 10, 2025
What to do if both the light and motor don't work on my Cooke & Lewis CLTHW60?
- G
  Gwendolyn CookAug 10, 2025
  If both the light and the motor aren't working on your Cooke & Lewis Ventilation Hood, the light bulb may have blown and needs replacing with a bulb of the correct rating. Also, check the power supply to ensure the power connection isn't loose.
S
sjonesAug 16, 2025
How to stop excessive vibration in my Cooke & Lewis CLTHW60?
- A
  Andrea HowardAug 16, 2025
  Excessive vibration in your Cooke & Lewis Ventilation Hood can be due to several factors. The appliance might not be installed properly on the brackets, so take down the appliance and check it is properly fixed. Also, the fan blade might be damaged, in which case you should switch off the appliance and have it repaired by qualified service personnel only. The fan motor might not be fixed tightly.
T
Timothy KaneAug 21, 2025
Why do cooking smells linger even when my Cooke & Lewis CLTHW60 works normally?
- B
  boydjosephAug 21, 2025
  If your Cooke & Lewis Ventilation Hood works normally but cooking smells linger, it may be because the carbon filter is not fitted in recirculation mode or is full of grease. In this case, fit a carbon filter or replace the carbon filter.
J
Jamie RasmussenAug 28, 2025
What to do if the light is on but the fan doesn't work on my Cooke & Lewis CLTHW60?
- M
  Matthew GutierrezAug 28, 2025
  If the light is on but the fan does not work on your Cooke & Lewis Ventilation Hood, the fan blade might be jammed or the motor might be damaged.