EasyManua.ls Logo

Cooke & Lewis CLCGB60 - User Manual

Cooke & Lewis CLCGB60
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
CLCGS60 3663602842590
CLCGB60 3663602842606
CLCGS90 3663602842613
CLCGB90 3663602842620
CLCGS70 3663602842774
CLCGB70 3663602691761
V40218
This file is the property of Kingfisher Group Plc. No copying, alteration or amendment is permitted without
written authorisation from the Kingfisher Brand Team.
V1.1
ᇹࡒמ֣ăěŗʗɡ2/5ǟϨҨ뼷ɑϨǢࣂĀߩݨԶѤӍ.CDɡӴҲŀмŗ฼ʸߩݨȞƥԶѤ뼶
ǕNJɫĀܨ࠰ᇹࡒמ֣ǨĈ뼶λǀᇹࡒȞײ֣ӿĀΒǚǜNj뼷ăīŢǕNJɫɘDŽҫ뼵ȻƑͱզϐ뼶
PROCESS
BLACK
SEPARATIONS JOB INFO
VERSION #
PID #: 00001
Agency job #: GLOA10325
Product Description: SMV4
100000028-100000031-100000047
Chimney V1
Brand: Cooke & Lewis
Brand Contact: Emma.Richardson@king sher.com
Barcode: 3663602842590/3663602842606/
3663602842613/3663602842620/
3663602842774/3663602691761
Vendor: Global Asian
No. of new line drawings: xx
Page size A5 / No. of printed pages 80
R 3 4 5 6 7 8
06/02/18
AM
08/02/18
TjB
00/00/18
INITIALS
00/00/18
INITIALS
00/00/18
INITIALS
00/00/18
INITIALS
00/00/18
INITIALS
00/00/18
INITIALS
1

Other manuals for Cooke & Lewis CLCGB60

Questions and Answers

  • M
    mendezkaitlinAug 12, 2025
    Why do cooking smells linger when using my Cooke & Lewis Ventilation Hood?
    • R
      Robert CookAug 12, 2025
      If cooking smells linger when using your Cooke & Lewis Ventilation Hood, it may be because the carbon filter is not fitted in recirculation mode or is full of grease. Fit a carbon filter or replace the carbon filter.
  • N
    Nathan WallaceAug 17, 2025
    Why is my Cooke & Lewis CLCGB60 suction performance reduced?
    • S
      Scott Meyer DDSAug 17, 2025
      Reduced suction performance in your Cooke & Lewis Ventilation Hood can occur for several reasons. The speed may be too low, so select a higher speed. The aluminum filters might be dirty, so clean them. The top vent could be obstructed, so clear any obstruction. If fitted, the optional vent kit might be twisted, so ensure it is fitted according to the manufacturer’s instructions. Also, the installation may not comply with the manufacturer's instructions; the vent hose should be the correct diameter throughout with no reductions or restrictions.
  • C
    Cristian RobersonAug 23, 2025
    What to do if my Cooke & Lewis CLCGB60 is vibrating excessively?
    • A
      Amanda StewartAug 23, 2025
      Excessive vibration in your Cooke & Lewis Ventilation Hood can be due to several factors. The appliance might not be installed properly on the brackets, in which case you should take down the appliance and check it is properly fixed. Alternatively, the fan blade could be damaged, so switch off the appliance and have it repaired by qualified service personnel only. It may also be caused by the fan motor not being fixed tightly.
  • J
    jonesjamesAug 30, 2025
    What to do if the light is on but the fan does not work on my Cooke & Lewis CLCGB60 Ventilation Hood?
    • H
      hballardAug 30, 2025
      If the light is on but the fan does not work on your Cooke & Lewis Ventilation Hood, it could be due to the fan blade being jammed or the motor being damaged.
  • R
    Rachael Rios DDSSep 5, 2025
    What to do if both the light and motor do not work on my Cooke & Lewis CLCGB60 Ventilation Hood?
    • J
      Jennifer SmithSep 5, 2025
      If both the light and motor do not work on your Cooke & Lewis Ventilation Hood, the light bulb may have blown, so replace it with a bulb of the correct rating. Also, the power connection may be loose, so check the power supply.

Cooke & Lewis CLCGB60 Specifications

General IconGeneral
BrandCooke & Lewis
ModelCLCGB60
Width60 cm
Number of Fan Speeds3
LightingLED
Filter TypeAluminium grease filter
Control TypePush Button
MaterialStainless Steel
TypeChimney

Related product manuals