Need help?Do you have a question about the Cooke & Lewis CLIBHS90 and is the answer not in the manual?
General| Brand | Cooke & Lewis |
|---|---|
| Model | CLIBHS90 |
| Width | 90 cm |
| Number of Fan Speeds | 3 |
| Noise Level | 65 dB |
| Lighting | LED |
| Color | Stainless Steel |
| Type | Integrated |
| Filter Type | Aluminium |
Read the separate safety guide carefully before using the appliance.
Professional install, electrical shock hazard, and ceiling weight capacity.
Choose between ducted extraction or recirculation mode for installation.
Check ceiling before drilling and use correct fixing hardware.
Mark and drill holes, then secure the top mounting plate to the ceiling.
Ensure ceiling supports weight; attach top plate to joists using suitable fixings.
Measure required height and fix hanging brackets.
Slide both chimney sections over the support brackets.
Lift hood and fix to ceiling bracket using supplied screws.
Slide chimney parts up and attach temporarily to legs using S hooks.
Connect mains cable after ducting is connected, ensure power is off.
Raise the inner chimney section to the ceiling and secure with screws.
Details on direct connection, earthing, and wiring colours for safe installation.
Read instructions and switch on the appliance before initial use.
Explanation of power, fan speed, and light controls on the panel.
How to use the built-in timer to automatically switch off the fan.
Details on LED lamp replacement and contacting service.
Guidance on replacing the carbon filter every 3 months.
Instructions for cleaning aluminium grease filters monthly to prevent fires.
To Next Page