Issue 4 05/08/2021 12
DESCALING (CONTINUED)
10. Discard any remaining descaling solution in the water tank.
Rinse the tank thoroughly with clean water and refill to the
max line.
11. Repeat steps 2–7 above a further three times to ensure
pipework is thoroughly flushed.
12. The espresso maker is now ready for use.
TROUBLE SHOOTING
Espresso leaking from
the filter holder
Check that the filter holder is inserted correctly
and it is in the correct ‘lock’ position.
Coffee powder not cleaned off the edge of the filter
holder.
Espresso does not come
out
No water or not enough water in the water tank.
Filter clogged because coffee ground too fine or
packed too tightly.
Coffee (green) or steam
(orange) ready
indicators do not come
on
Check temperature on gauge has reached the
warm (red) zone.
Check steam button is in correct position (pressed
for steam, unpressed for coffee)
Steam does not come
out of the steam nozzle
No water or not enough water in the water tank.
Steam temperature indicator not lit.
Insufficient froth
generated
No water or not enough water in the water tank.
Steam nozzle position in milk incorrect. Move
nozzle up and down in milk when frothing.
Use whole or semi skimmed milk
To Next Page
Loading...
