Cookworks SMB177S1B-P - Parts and Assembly; Component Identification

Issue 2 04/05/2021
7
G
F
E
D
C
B
Parts & assembly
A
H
A. Control panel
B. Door release button
C. Waveguide cover
D. Turntable shaft
E. Turntable roller
F. Glass turntable
G. Door with viewing panel
H. Interlocking catches
• Ensure all packaging materials, protective film and adhesive tape
are removed and check the oven and door for any damage. Do
not remove the wave guide cover.
• Assemble as shown above and ensure that the glass turntable is
correctly positioned on the shaft and roller.