1. PRELIMINARY REMARKS
Thank you for buying our blast chiller-freezer. All our products are subject to constant quality control.
Please read the manual carefully so as to be able to enable long and problem-free use of our products.
The operating manual is intended to provide the following information:
• general tips;
• safety regulations;
• technical data;
• installation;
• use;
• maintenance;
• guarantee and service;
• scrapping and recycling; and
• declaration of conformity.
2. PURPOSE OF USE
Blast chillers-freezers are used to quickly cool down certain food products so as to avoid growth of
bacteria in food and to maintain high quality of food.
Such equipment is used in two ways:
• Quick cooling in order to reduce the temperature from +90 °C to +3 °C in 90 minutes.
• Freezing in order to reduce the temperature from +90 °C to -18 °C in 240 minutes.
During the quick cooling, one can set the most appropriate cooling cycles for the specific food products
being cooled.
After the cycle is completed, the equipment switches to the storage mode. One must keep in mind that
the blast chiller-freezer is intended for storage of products for up to 2 days.
3. GENERAL TIPS
• The equipment is suitable only for quick cooling/blast freezing of food products.
• After the equipment is unpacked and the protections are removed, please check if the
equipment is not damaged. If any damage is found, please inform the supplier or installer
immediately.
• Before works related to setting and installation are started, please check if the data pertaining
to the power and voltage of the electrical system given in the data plate correspond to the actual
local values. The data plate is located in the back of the equipment and on the back page of the
operating manual.
• In the event of a breakdown, the equipment must be switched off immediately.
Installation, startup, and maintenance of the blast chiller-freezer must be performed by qualified
companies that provide cooling services or by persons authorized by the manufacturer. In order to
ensure safe installation, use, and maintenance of the blast chiller, one must carefully read the
instructions contained in this manual and keep this manual in a place where it will be easily accessible
for the user.
4. SAFETY REGULATIONS
To Next Page