Why is water spitting from my Cool Space Freezer?
Water spitting from the unit or dripping from pads can be caused by a too strong water flow, cracked Hose & Valve Assembly, loose hose connection or incorrectly installed pads. Reduce flow, replace Hose & Valve Assembly, tighten hose, adjust Drip retainer on spray bar, reinstall pads correctly.
Why is the floor wet next to my Cool Space BLIZZARD50 Freezer?
The floor at the side of your Cool Space unit might be wet because the water inlet hose is loose at the supply hose or at the bulkhead fitting. Tighten the connections and/or replace the hose washers.
Details on safely unpacking the COOL-SPACE® unit from its packaging.
Instructions for connecting the unit to a water source, including pressure limits.
Guidance on connecting the unit to a power source, including electrical requirements and extension cord use.
Steps to fill the unit's water reservoir using the float valve mechanism.
Instructions on how to turn on the fan and adjust its speed for comfort.
Procedure for starting the water pump and regulating water flow to the cooling pads.
Steps to remove cooling pads for internal maintenance and access.
Recommended daily tasks for maintaining the unit's efficiency and pad life.
Guidelines for regular cleaning and draining of the water sump and pads.
Instructions for proper storage of the unit to prevent dust build-up and damage.
General guidance and systematic approach to identifying and resolving unit problems.
Detailed steps for replacing key components like the fan motor and pump.
Contact information and resources for obtaining technical assistance and support.
Procedure for registering the product to validate warranty coverage.
Information on obtaining replacement parts under warranty.
Details on available accessories and non-warranty replacement parts.
General| Brand | Cool Space |
|---|---|
| Model | BLIZZARD50 |
| Category | Freezer |
| Language | English |
To Next Page
