Cooledge CTR-SCT-DMX-58V - Page 14

EXT-0087-R00-01082020 (LTR) 14/17
STANDALONE TNW/DTW MODE
Use the following charts for selecting the fixed output levels for TNW and DTW. Minimum dimming level for TNW is 1%, levels 0-5*
will result in 1% intensity for TNW. When using DTW in Standalone mode switches 8-11 are ignored as CCT is not independently
adjustable in DTW, the selected intensity will determine the CCT according to Figure 7.
INTENSITY
Level Dip Setting Output (%)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
0.05*
0.16*
0.25*
0.39*
0.62*
0.99*
1.58
2.51
3.99
6.34
10.09
16.05
25.53
40.62
64.61
100.0
CCT
Level Dip Setting Color Temp (K)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
1010
1011
1100
1101
1110
1111
2700
2850
3000
3200
3400
3600
3800
4000
4200
4400
4600
4800
5000
5200
5400
5700
100.0
90.0
80.0
70.0
60.0
50.0
40.0
30.0
20.0
10.0
0.0
0 1 2 3 4 5 6 8 9 10 11 12 13 14 157
Level
D.C. Output (%)
Figure 7: Intensity and CCT selection chart (LEFT), level and output chart (RIGHT)
Standalone TNW/DTW Chart Mode Switch 1-3 Switches 4-7 (Intensity) Switches 8-12 (CCT)
Fixed Output - TNW 1-1-0 X-X-X-X X-X-X-X-0
Fixed Output - DTW 1-1-0 X-X-X-X X-X-X-X-1
X = IGNORED