EasyManua.ls Logo

Coolmax CUL-750B - User Manual

Coolmax CUL-750B
3 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Model: CUL-750B
1. Function Description
This power supply is designed for personal computer. There are DC outputs:
+3.3V, +5V, +12V1, +12V2, +12V3, +12V4, -12V & +5V
SB
, and it provides
power to all computer systems and peripherals with maximum protection.
Here are some of the key features:
Full Range Input Voltage (OPTIONAL)
Active Power Factor Correction(OPTIONAL)
Surge Current Protection
Input Transient Voltage Protection
Over Voltage Protection
Over Load Protection
Short Circuit Protection
Low noise design ***
Compare with the conventional power supply which hires 80mm fan
assembled at the side of chassis, the power supply is assembled with a
120mm led fan horizontally located at the top chassis, with bigger fan blade, and
just right assembly location, it cools down the heating components
more effectively, and much low noise also gained.
2. How to Setup
It is rather simple to install this power supply to your precious computer tower.
Follow the steps below to finish the setup.
Step1: Open the computer tower cover; put the power supply into the
corresponding location of the tower, and then use right screws
to fix the power supply to tower.
Step2: Put the Main Power Connector, ATX12V Connector, Peripheral
Connectors, Floppy Connectors, PCI-Express Connector and many
others (when available) to the corresponding male sockets such as
main-board, peripheral devices (i.e. HDD, CDROM etc.) and floppy
drivers respectively. When you connect connectors, please pay
attention to the orientation of them because of the different hole sizes. Find
the proper orientation and push down firmly making sure that
the pins are aligned.
3. Specifications
3.1 Input Requirements
The power supply shall operate as below:
1
Question and Answer IconNeed help?

Do you have a question about the Coolmax CUL-750B and is the answer not in the manual?

Summary

Function Description

Key Features

Highlights of the power supply including input voltage, power factor correction, and protection features.

How to Setup

Installation Steps

Step-by-step guide for installing the power supply into a computer tower and connecting components.

Specifications

Input Requirements

Details on the voltage and frequency requirements for the power supply operation.

DC Output Configuration

Table detailing the DC output voltages and their maximum load capacities in Amperes.

Protection Features

Description of built-in protection mechanisms: short circuit, over voltage, and over load.

Short Circuit Protection

Explanation of how the power supply handles short circuit conditions on its DC outputs.

No Load Operation

Information on the power supply's behavior when no DC output load is connected.

Over Load Protection

Details on the shutdown mechanism when the total load exceeds specified limits.

Physical Environment

Specifies the operating and storage conditions including temperature and humidity levels.

Regulatory Compliance

Lists the safety and EMI certifications obtained by the power supply.

Precautions

Safety Warnings

Critical safety advice, including avoiding opening the case and keeping away from moisture.

Simple Maintenance

Troubleshooting Steps

Basic checks to perform if the power supply is not working correctly before seeking repair.

Coolmax CUL-750B Specifications

General IconGeneral
Total power750 W
AC input voltage115 - 230 V
Combined power (-12V)6 W
Combined power (+5Vsb)15 W
Max output current (+5V)30 A
Max output current (-12V)0.5 A
Power protection featuresOver voltage, Overload, Short circuit
Max output current (+3.3V)24 A
Max output current (+5Vsb)3 A
Maximum input current (@110V)+12V1, +12V2, +12V3, +12V4, +3.3V, +5V, +5Vsb, -12V A
PurposePC
ATX version2.3
EPS version2.92
Noise level- dB
Power supply unit (PSU) form factorATX
Cooling typeActive
Fan diameter140 mm
IlluminationYes
Product colorBlack
Number of fans1 fan(s)
Cabling typeSemi-Modular
Motherboard power connector20+4 pin ATX
Number of SATA power connectors4
PCI Express power connectors (6-pin)1
Illumination colorBlue
Storage temperature (T-T)-20 - 80 °C
Operating temperature (T-T)0 - 50 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth83.8 mm
Width160 mm
Height150 mm
Weight1800 g

Related product manuals