Coolmay L02 Series PLC Programming Manual
◆Support online editing mode, allowing users to update the program
without affecting the system operation while the system is running.
◆
Supported programming languages: Ladder Diagram (LD) and
Sequential Function Chart (SFC).
Note: Structured programming and tags are not supported.
6) Multifunctional communication interface
◆L02 series host PLC has two default programming ports, 1 Type-C
programming port, the download speed is faster; 1 RS232, which the
interface terminal is an 8-hole mouse head female socket.
Note: When using FX3U mode, the download program only supports
RS232 download.
◆
Provide 2 RS485, support Mitsubishi programming port
protocol/modbus RTU protocol/free port protocol/Mitsubishi BD board
protocol, easily realize PLC interconnection and communication with external
equipment such as HMI and vfd inverters .
◆1 CAN, support CAN2.0A, CAN2.0B, modbus networking and free port
protocol, can easily realize multi-channel interconnection.
◆
1 high-speed Ethernet interface, supporting Mitsubishi programming
port protocol, modbus TCP/UDP protocol, Ethernet/IP protocol.
7) Memory card storage interface
◆
The memory card interface provides the following functions:
System backup: user programs, CPU parameters, I/O configuration
settings, device settings
System response: user program, CPU parameters, I/O configuration
settings, device settings
Parameter storage: device content value
Record storage: system error record, system status record
8) Installation and I/O module replacement method
To Next Page