Why is my Cooper & Hunter Air Conditioner overloaded?
Your Cooper & Hunter Air Conditioner might be overloaded due to an unstable supply voltage or poor radiating, causing the system to overload. To resolve this, check the voltage of the power supply and inspect the system for radiating issues.
What to do if there is a wiring issue with the mainboard and wifi module in Cooper & Hunter Air Conditioner?
If you're experiencing wiring issues with the mainboard and Wi-Fi module in your Cooper & Hunter Air Conditioner, it could be due to a loosened or poorly contacted wiring terminal, or a faulty mainboard or Wi-Fi module. First, check the wiring terminal. If the issue persists, inspect the mainboard and Wi-Fi module, and replace any defective components.
Controls for turning the unit on/off and selecting operating modes.
Adjusting fan speed and controlling louvre swing direction.
Adjusting temperature and using special functions like Health, Wi-Fi, and timers.
Enables or disables the child lock feature on the remote control.
Switches the temperature display between Celsius (°C) and Fahrenheit (°F).
Enables operation in low ambient temperatures for heating.
General| Type | Split System |
|---|---|
| Voltage | 208-230V |
| Refrigerant | R410A |
| Inverter | Yes |
| Coefficient of Performance (COP) | 4.0 |
| Operating Temperature (Heating) | 5°F to 75°F |
| Cooling Capacity | 9000 BTU |
| Heating Capacity | 10000 BTU |
To Next Page
