Cordless Extendable Hedge Trimmer 10653 Instructions for Use
Please read and retain these instructions for future reference v002: 20/12/16
OPERATING THE HEDGE TRIMMER
1. Set the trimmer head to the
desired angle by pushing in the
black button at the base of the
trimmer head and rotating the
head to the desired angle.
Ensure the trimmer head is
locked in position when the
button is released. Always
disconnect the battery before
changing the angle.
2. There is a large trigger and a
safety switch on the handle.
Both must be pressed
simultaneously for the hedge
trimmer to operate. Squeeze
the uppermost part of the
trigger while pressing in the
safety switch with the same
hand. The other hand should
be used to steady the pole.
3. To stop, release the trigger and the blade will stop within 2 seconds. The safety switch will also
return to its original position. Replace the guard.
4. When blade speed or performance reduce, stop working and recharge the battery.
CHARGING/RE-CHARGING
FIG A
(1). Connect the charger (7) to the charger station (8).
To Next Page
Loading...