- 9 -
EN
Device Updates
Device Settings
APP Updates: Open the CoospoRide APP and go to Device > Connected Device > Firmware Update. Click on Check for
Updates and follow the guidelines to complete the device update.
The system default mode cannot be deleted.
Ride Mode
New Mode: Select New Mode and press to add up to five new ride modes. Each mode can be set separately.
Delete Mode: New mode can be deleted.
Alert Settings: Enable alerts and set a data threshold. When the data exceeds the threshold, the bike computer will
display a pop-up window to alert you.
Pages & Fields: Consistent with the pages and fields in the Cycling Pages > Functions Menu.
Auto Page Turning: Automatically display all pages by turns.
Auto Start: Automatically start recording riding data without pressing the start button.
Auto Pause: Automatically pause recording when the speed is below the value you set.
Auto Settings: Auto Lap: Automatically count laps by distance/time/position.
！
GPS： Set GPS Mode
My Stats
User Settings: Please make sure the profile is set correctly as it will affect the accuracy of the measurement data.
Heart Rate Zone: If you know your current Max Heart Rate, please input that value. If not, you can use the default
maximum heart rate formula (220-age).
Power Zone: If you know your Max Functional Threshold Power, please enter and calculate your FTP automatically.
If not, please refer to the system default value: 200.
To Next Page
