Xenus Plus User Guide 16-01344 Rev 06
Copley Controls 7
Related Documentation
For important setup and operation information, see the CME User Guide (Under Using CME2 here:
http://www.copleycontrols.com/Motion/Downloads/software.html).
Users of the CANopen features should also read these Copley Controls documents:
• CANopen Programmer’s Manual
• CMO (Copley Motion Objects) Programmer’s Guide
• CML Reference Manual
And, this guide for MACRO network users:
• MACRO Network User Guide
Also of related interest:
• Indexer 2 Program User’s Guide (describes use of Indexer Program to create motion
control sequences)
• ASCII Programmer’s Guide (describes how to send ASCII format commands over a
drive’s serial bus to set up and control one or more drives)
• Copley Amplifier Parameter Dictionary
• Copley Camming User Guide
• Copley Controls Serial Encoder Guide
• CPL User Guide
• Xenus Plus Dual-Axis STO Manual
Links to these publications, along with other documents, data sheets and software releases, can
be found at: http://www.copleycontrols.com.
Comments
Copley Controls welcomes your comments on this manual.
For contact information, see http://www.copleycontrols.com.
Copyrights
No part of this document may be reproduced in any form or by any means, electronic or mechanical,
including photocopying, without express written permission of Copley Controls.
Xenus XEL, XE2, XPL, XP2, XML and XM2 are registered trademarks of Copley Controls.
CME is a registered trademark of Copley Controls.
Windows XP, Windows 7, Visual Basic, and .NET are trademarks or registered trademarks
of the Microsoft Corporation.
LabVIEW is a registered trademark of National Instruments.
EtherCAT is a registered trademark and patented technology,
licensed by Beckhoff Automation GmbH, Germany.
Document Validity
We reserve the right to modify our products. The information in this document is subject to change
without notice and does not represent a commitment by Copley Controls.
Copley Controls assumes no responsibility for any errors that may appear in this document.
To Next Page
Loading...
