as it could reduce your installation costs.
• In order to avoid a hazard, this appliance must
be installed according to these instructions for
installation.
• This appliance is to be properly installed and
earthed only by a suitably qualified person.
• This appliance should be connected to a circuit
which incorporates an isolating switch
providing full disconnection from the power
supply.
• WARNING: Use only hob guards designed by
the manufacturer of the cooking appliance or
indicated by the manufacturer of the
appliance in the instructions for use as
suitable or hob guards incorporated in the
appliance. The use of inappropriate guards
can cause accidents.
• Failure to install the appliance correctly could
invalidate any warranty or liability claims.
• Regarding the details of installation, thanks to
refer to the section <Installation>.
Operation and maintenance
Electrical Shock Hazard
• Do not cook on a broken or cracked cooktop. If
the cooktop surface should break or crack,
switch the appliance off immediately at the
mains power supply (wall switch) and contact a
qualified technician.
To Next Page
Loading...
