What to do if the LED does not come on when CORBERO CCIM3FBS310 Hob is plugged in?
First, ensure the plug is tightly secured in the outlet and that the outlet is working. Then, check the connection between the accessorial power board and the display board. If problems persist, the accessorial power board or the display board may be damaged and require replacement.
What to do if heating stops suddenly during operation and the display flashes “u” on my CORBERO CCIM3FBS310?
This issue may occur due to several reasons. Ensure you are using the proper pot as described in the instruction manual. It's also possible that the pan detection circuit is damaged, requiring replacement of the power board. Lastly, the cooker may have overheated; in this case, wait for the temperature to return to normal and then push the “ON/OFF” button to restart the unit.
What to do if some buttons can’t work, or the LED display is not normal on CORBERO CCIM3FBS310?
If some buttons aren't working or the LED display is abnormal, the display board may be damaged and require replacement.
What to do if the fan motor sounds abnormal in CORBERO CCIM3FBS310 Hob?
If the fan motor sounds abnormal, it's likely that the fan motor is damaged and needs to be replaced.
What to do if there is something wrong with the fan in CORBERO Hob?
Check if the fan runs smoothly. If it does not, replace it.
What to do if heating zones of the same side ( Such as the first and the second zone ) would display “u” on CORBERO CCIM3FBS310 Hob?
Check the connection between the power board and the display board. If the issue persists, the display board's communication part may be damaged, or the main board could be damaged, requiring replacement of either the display board or the power board.
Why is my CORBERO CCIM3FBS310 at a high temperature?
The ambient temperature may be too high, or the air intake or air vent may be blocked.
What to do if supply voltage is below the rated voltage in CORBERO Hob?
Inspect whether the power supply is normal. Power on after the power supply is normal.
What to do if high temperature of IGBT in CORBERO Hob?
Wait for the temperature of IGBT to return to normal. Touch the “ON/OFF” button to restart the unit. Also, check if the fan runs smoothly; if not, replace the fan.
What to do if there is high temperature of ceramic plate sensor in CORBERO CCIM3FBS310?
Wait for the temperature of the ceramic plate to return to normal. Touch the “ON/OFF” button to restart the unit.
General| Type | Induction |
|---|---|
| Number of Zones | 3 |
| Power | 7.4 kW |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Dimensions | 590 x 520 x 62 mm |
| Control Type | Touch Control |
| Material | Glass-ceramic |
| Safety Features | Child lock, overheat protection, auto shut-off |
To Next Page