Why does my CORBERO CCVV420 Hob turn off and show 'F' on the display?
If your CORBERO Hob shuts off during use and an 'F' is displayed on each display, it means the controls are either damp or something is on them. Make sure to dry the controls or remove any objects from the control area.
Why is the CORBERO CCVV420 display black and not turning on?
If the display on your CORBERO Hob control card is black and you cannot turn on the hob or cooking zones, it suggests a lack of power supply. First, check the household fuse for the appliance. Then, verify if there is a power outage by testing other electronic devices.
General safety precautions for appliance use, including child safety and fire risks.
Critical safety points related to the appliance's installation process and environment.
Essential safety guidelines to follow while operating the hob, including material placement.
Safety measures required before and during cleaning and maintenance operations.
Steps and requirements for physically installing the hob, including aperture dimensions and worktop needs.
Safety aspects of connecting the appliance to the electrical supply and mains wiring.
Identifies primary hob components like ceramic heaters and control panel.
Explains operation of hob controls, heat settings, locking, and special functions.
Instructions and warnings for safely cleaning the hob and its surfaces.
Solutions for common problems encountered with the hob's functionality and operation.
Guidelines for packing and moving the appliance to prevent damage during transit.
General| Model | CCVV420 |
|---|---|
| Brand | CORBERO |
| Number of burners | 4 |
| Ignition type | Automatic |
| Gas type | Butane/Propane |
To Next Page