What to do if my CORBERO CCIM3F300 has no power?
If your CORBERO Hob isn't receiving power, begin by verifying that the plug is securely inserted into the outlet and that the outlet itself is functioning correctly.
What to do if my CORBERO CCIM3F300 is too hot?
If your CORBERO Hob is overheating, it might be due to a high ambient temperature or blocked air intake/vent. Ensure that the hob has adequate ventilation and the surrounding temperature is within acceptable limits.
What to do if my CORBERO CCIM3F300 displays 'u' on heating zones?
If the heating zones on the same side (e.g., the first and second zone) of your CORBERO Hob display 'u', it could indicate a connection problem between the power board and the display board, damage to the communication part of the display board, or damage to the main board. You should check the connection. If that doesn't resolve the issue, the display board or the power board may need to be replaced.
What to do if my CORBERO CCIM3F300 Hob says pan type is wrong?
If your CORBERO Hob indicates that the pan type is incorrect, ensure you are using a suitable pot. Refer to the instruction manual for guidance on selecting the correct type of cookware.
What to do if my CORBERO CCIM3F300 Hob fan is not working?
If there is something wrong with the fan, check whether the fan runs smoothly. If it doesn't, replace the fan.
What to do if the fan motor of my CORBERO CCIM3F300 is damaged?
If the fan motor of your CORBERO Hob is damaged, replace the fan.
What to do if my CORBERO Hob shows a communication error?
If your CORBERO Hob displays a communication error, try reinserting the connection between the display board and the power board. If the issue persists, consider replacing either the power board or the display board.
What to do if the voltage supply is below the rated voltage in my CORBERO CCIM3F300?
If the supply voltage to your CORBERO Hob is below the rated voltage, inspect the power supply to ensure it is normal. Power on the hob once the power supply is stable.
What to do if the accessorial power board of my CORBERO CCIM3F300 is damaged?
If the accessorial power board of your CORBERO Hob is damaged, replace it.
What to do if the display board of my CORBERO CCIM3F300 Hob is damaged?
If the display board of your CORBERO Hob is damaged, replace it.
General| Type | Induction |
|---|---|
| Number of zones | 3 |
| Voltage | 220-240 V |
| Dimensions | 590 x 520 x 60 mm |
| Frequency | 50-60 Hz |
| Material | Glass-ceramic |
| Safety Features | Child lock, overheating protection |
| Control Type | Touch control |
To Next Page