11
Note: The safety distance between the hotplate and the cupboard above the
hotplate should be at least 760mm.
shown in figure (4)) after installation. Adjust the bracket position to suit for
different table top thickness.
Figure (4)
Cautions:
1. The induction hotplate must be installed by qualified personnel or
technicians. We have professionals at your service. Please never conduct
the operation by yourself.
2. The induction hotplate shall be installed such that better heat radiation can
be ensured to enhance its reliability.
3. The wall and induced heating zone above the table surface shall withstand
heat.
4. To avoid any damage, the sandwich layer and adhesive must be resistant to
heat.
ELECTRICAL CONNECTION
"The installation must conform to the standard directives."
The manufacturer declines all responsibility for any damage that may be
caused by unsuitable or unreasonable use.
Fix the hob on the table by screw two brackets on the bottom of hob (as
To Next Page
Loading...
