EasyManua.ls Logo

CORBERO CLA1016W - Automatic Fault Warnings and What to Do; E01: Door Open Fault; E02: Low Water Pressure; E03: Pump Fault or Clogged Filter

CORBERO CLA1016W
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
71
CHAPTER -10: AUTOMATIC FAULT WARNINGS AND
WHAT TO BE DONE
Yourmachineisequippedwiththesystemswhicharecapa-
bleofbothtakingnecessaryprecautionsandwarningyouin
caseofanybreakdownbymeansofcontinuousself-check-
ingduringwashingoperations.
(*)Seethechapterregardingmaintenanceandcleaningof
yourmachine.
Thedoorof
yourmachineis
leftopen.
Thewaterpressure
orthewaterlevel
insidethemachine
islow.
Thepumpisfaultyor
pumplterisclogged
orelectricalconnec-
tionofthepumpis
faulty.
Yourmachinehas
excessiveamountof
water.
Cleanthepumplter.Iftheproblem
persists,contactthenearestauthor-
isedservice.(*)
Turnonthefaucet.Mainswater
maybecut-off.Iftheproblemstill
continues,yourmachinewillstop
afterawhileautomatically.Unplug
themachine,turnoffyourfaucet
andcontactthenearestauthorised
service.
Closethemachinedoor.Ifyour
machinepersiststoindicatefault,
turnoffyourmachine,unplugit
andcontactthenearestauthorised
serviceimmediately.
TROUBLE
CODE
POSSIBLE
FAULT
WHAT TO DO
E01
E03
E02
E04
Wash
Wash
Wash
Wash
Rinse
End
End
Rinse
Rinse
Rinse
Yourmachinewilldischarge
waterbyitself.Pursuanttodis-
chargingoperation,turnoffyour
machineandunplugit.Turnoff
yourfaucetandcontactthenear-
estauthorisedservice.

Related product manuals