EasyManua.ls Logo

CORBERO CLA5018W - Water Discharge Connection; 4 Control Panel Overview; Detergent Drawer

CORBERO CLA5018W
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 10
using the supplied new fill hose. Old hoses
must not be reused.
3.5. Water Discharge Connection
Connect the water drain hose to a
standpipe or to the outlet elbow of
a household sink, using additional
equipment.
Never attempt to extend the water drain
hose.
Do not put the water drain hose from
your machine into a container, bucket or
bathtub.
Make sure that the water drain hose is
not bent, buckled, crushed or extended.
The water drain hose must be installed
at a maximum height of 100 cm from the
ground.
4. CONTROL PANEL OVERVIEW
1 2 3
1. Detergent Drawer
2. Programme Dial
3. Function LEDs
4.1. Detergent Drawer
1
2
3
4
5
6
1. Liquid Detergent Attachments
2. Main Wash Detergent Compartment
3. Softener Compartment
4. Pre-Wash Detergent Compartment
5. Powder Detergent Levels
6. Powder Detergent Scoop (*)
(*) Specifications may vary depending on
the machine purchased.
52246774_F1B_EN_GOLDEN.indd 10 27.04.2018 13:36:25

Related product manuals