OPERATION
Option
Tiempo/Tempo
When the Tiempo/Tempo programme is selected, the
Tiempo/Tempo button can be used to adjust the drying time
in 10 min. steps.
Inicio diferido/Início retardado
This function is used for delaying the start of the drying
programme up to 24 hours. When the delayed programme
starts, the time starts to countdown on the display and the
delay icon blinks.
1.
Load your laundry and make sure the machine door is
closed.
2.
Press the On/Off button, then use the programme selector
knob to select the desired programme.
3.
You can additionally select the Antiarrugas/ Anti-rugas or
Signal functions according to your need.
4.
Press the Inicio diferido/Início retardado button.
5.
Repeatedly to press the Inicio diferido/Início retardado
button to select the desired delay time.
6.
After the Iniciar/Pausar button is pressed, the dryer is at
the running condition. The drying procedure will be
automa-tically performed when the delay time is over.
7.
If you press the Iniciar/Pausar button again, the
delay function will be paused.
8.
If you want to cancel the “Inicio diferido/Início retardado”
function, please press the On/Off button.
Inicio
Diferido
Tiempo
Intensidad/Intensidade
You can adjust the dryness level of the laundry by pressing
the Intensidad de secado button. There are four grades.
1. The intensity function can be activated only before the
programme starts.
2. Press the Intensidad/Intensidade button repeatedly to
increase the drying grade.
Intensidad/
Intensidade
17
V.1
Antiarrugas/Anti-rugas
At the end of the drying cycle, the anti-crease time is 60 minutes
(default) or 120 minutes (selected). This function prevents the
laundry from creases. The laundry can be removed during the anti-
and Refrescar crease phase. Except Enfriar/Arrefecer , Lana/Lã
all the other programmes have this function.
Anti
arrugas
To Next Page
Loading...
