OPERATION
Mi/Meu Ciclo
(My Cycle)
Used to define and save your favourite programme, which is used
frequently.
1. Select the desired programme and other drying functions.
2. Press and hold Intensidad/Intensidade for 3 seconds until the
beep sounds and the desired programme has been saved.
3. Turn the programme selector to the My Cycle position, then
you can start your favourite programme. If you want to change
the My Cycle settings, repeat the steps (1) and (2).
Mi Ciclo
Child Lock
1. This machine incorporates a special child safety lock, which can
prevent children from carelessly pressing buttons or making the
faulty operation.
2. When the drying cycle is running, press the Antiarrugas/Anti-
rugas button at the same time for 3 seconds to start child lock
function.
3. When child lock function is set, the display will show Child lock
icon and all button are deactivated, except On/Off button.
4. To deactivate the child lock function, the Antiarrugas/Anti-rugas
button shall be pressed at the same time for 3 seconds.
Child
Lock
Child lock
Remaining Time indicator/Error message
Clean filters (warning)
Intensidad/Intensidade (Intensity)
Mi/Meu Ciclo (My Cycle)
Display
18
V.1
Empty water container (warning)
To Next Page
Loading...
