CORBERO LDE1850 - Description of Controls; Control Panel Overview

28
DESCRIPTION OF THE CONTROLS
H
J
K
L
M
N
P
A
B
B
C
D
F
G
40
°- 60°
40°- 60°
30°- 40°
40°
60°- 90°
60°- 90°
40°- 60°
30°- 40°
TEMPERATURAS
PROGRAMAS
MARCHA
A
B
C
D
G
K
L
J
F
M
N
P
H
30°
40°
50°
70°
80°
90°
60°
1 2 3
1. WASHING POWDER DISPENSER
The dispenser is
provided with 4
compartments marked
with the following
symbols:
ÇPrewashÈ symbol shows the compartment for the
prewash detergent.
ÇWashÈ symbol shows the compartment for the
washing detergent.
ÇsmoothÈ symbol shows the compartment for the
smoothing additives.
ÇbleachÈ symbol shows the compartment for the
bleaching additives.
2. ON/OFF LAMP
It lights when the appliance is operating.
3. PROGRAM SELECTOR
To select the required program turn the control clockwise
until the marker on the top coincides with the number of the
required program (reference mark on the control panel). If
at any chance you pass by the required number NEVER
TURN THE CONTROL ANTICLOCKWISE just continue
clockwise until the required number is reached again.
“COLD WASH” BUTTON (Mod.: LDE 1400)
Pressing this button when starting any program it will be run
through with cold water. All other features of the program
as intensity and duration remain unchanged. Advisable for
synthetic and delicate fabrics: curtains, stores and other not
too dirty fabrics.
BUTTON (Mod.: LDE 1400)
Pressing this button when starting A or B programmes, the
temperature will be increased from 60¡C to 90¡C.
“1/2 LOAD” BUTTON
(Mod.: LDE 1450, LDE 1550 y LDE 1850)
Pressing this button before starting the ÒintenseÓ
programmes there will be one rinse less which leads to
energy and water saving.
“800/500”BUTTON (Mod.: LDE 1850)
If your washing machine is provided with this push button,
press it to reduce the spinning speed from 800 to 550 r.p.m.
“NO SPINNING” BUTTON (Mod.: LDE 1450)
Pressing this button before starting the ÒintenseÓ washing
program all spinnings will be excluded. The other steps of
the program remain unchanged.
“RINSE HOLD” BUTTON (delicate fabrics only)
(Mod.: LDE 1550 y LDE 1850)
Pressing this button together with the programs for delicate
fabrics, the water will hold up in the wash tub at the end of
the cycle. Press again to drain the water and take out the
clothes.
TEMPERATURE SELECTOR
This control allows you to select the temperature of the
washing cycle in accordance with the kind of clothes to be
washed.
Press and turn the control until the required temperature
coincides with the marker.
On the program table you will find the most apropriate
temperature for each kind of washing. Selecting any
program can be run through with cold water. This will
ensure a saving in electricity consumption.
Control panel