EM 8070 operator’s manual
GB
TRANSPORT, STORAGE AND HANDLING
The basic balancing machine packaging consists of 1 wood package containing:
- the balancing machine unit (P, fig.4);
- the support cabinet and head unit plates (A, fig.5); the monitor in its packing;
accessories.
- the support tube and wheel guard (A, B, fig.6).
- Before installation, the balancing machine must be transported in its original
packaging, keeping it in the position marked on the packaging. It can be
transported by placing the box on a wheeled trolley or by inserting the forks of a
fork-lift truck into the openings in the pallet (fig.1).
- Packing dimensions.
Length Depth Height Weight Packing weight
(mm) (mm) (mm) (kg) (kg)
1470 850 1150 207 50
- Ambient conditions in place of storage:
• relative humidity from 20% to 95%;
• temperature from -10° to +60°C.
ATTENTION
Do not place other items on top of the two packs, as this may result in damage.
After installation, the machine can be moved using the following methods:
- with a crane, using special equipment that holds the machine at the lifting points
(fig.2);
- inserting the forks of the lift truck under the machine so that the centre of the forks
correspond approximately to the centre line of the cabinet (fig.3).
WARNING
Always unplug the power supply lead from the socket before moving the machine.
ATTENTION
Never apply force to the spin shaft when moving the machine.
Грузик - все для шиномонтажа www.gruzik.com.ua
To Next Page
Loading...