EM 8070 operator’s manual
GB
WARNING
Do not remove or deface the Safety, Danger or Instruction decals. Replace any
missing or illegible Safety, Danger or Instruction decals. Replacement decals
can be obtained from your nearest CORGHI dealer.
- When using and carrying out maintenance on the machine, observe the unified
industrial accident prevention regulations for high voltage industrial equipment
and rotating machinery.
- Any unauthorised alterations made to the machine automatically release the
manufacturer from any liability in the case of damage or accidents as a result of
such alterations. Specifically, tampering with or removing the machine’s safety
devices is a breach of the regulations for industrial accident prevention.
WARNING
During work and maintenance operations, always tie up long hair and do not
wear loose clothing, ties, necklaces, wristwatches or any other items that may
get caught up in the moving parts.
Key to warning and instructions labels
Never apply force to the spin shaft when moving the machine.
Unplug the power supply cable before carrying out maintenance/
assistance work on the machine.
Do not lift up the guard when the wheel is turning.
Грузик - все для шиномонтажа www.gruzik.com.ua
To Next Page