What to do if my Corghi Lifting Systems does not work?
If your Corghi Lifting System isn't working at all, and there's no response when you try to use it, make sure the emergency switch or disconnector is set to the '1' (ON) position. Also, inspect the limit switch, cable connections, and fuses. If the limit switch has tripped, address the cause. Ensure all cable connections are secure. Replace any burnt-out fuses.
What to do if the carriages of Corghi Lifting Systems do not go down?
If the carriages on your Corghi Lifting System don't move downward when you press the DOWN button, it could be due to a tripped minimum height limit switch or a stuck carriage. Inspect the limit switch. If the carriage is stuck, try raising it slightly and then releasing it to see if it frees up.
Why Corghi Lifting Systems does not run when pressing the UP push-button?
If your Corghi Lifting System doesn't run when you press the UP button, the maximum height limit switch might have tripped. Check the limit switch.
General| Brand | Corghi |
|---|---|
| Model | ERCO 3222N CEL |
| Category | Lifting Systems |
| Language | English |
To Next Page
