TOP SEAT INSTALLATION
13
Place the top seats on the top of the uprights. Center the top seat
between the two the uprights and be certain to evenly distribute the
ledges all around.
Be sure to have a vertical (plumb) upright before fixing the top seat.
Secure the top seat in place using four (4) screws "Z" .
Same installation procedure for the straight section.
SEAT CAP INSTALLATION
14
Snap the seat cap starting outside the top seat.
Then snap the other side inside the top seat.
Snap the two front hooks of the seat cap extension in the two holes
under the seat cap.
Secure the seat cap extension in place using two (2) screws ‘’Z’’.
Same installation procedure for the straight section.
To Next Page
Loading...
